Product Code: SEI
(ISO-32/46)
For Rotary and
Reciprocating Compressors
MSOIL SE Series Synthetic Ester
Compressor Oils/Coolants are formulated with premium synthetic
ester technology. These high quality, long life fluids last
several times longer in use than mineral-based oils. AMSOIL SE
Series Synthetic Ester Compressor Oils/Coolants are fully
formulated with non-detergent additives and are designed for use
in rotary screw, vane and reciprocating compressors. SE Series
Synthetic Ester Compressor Oils/Coolants increase operating
efficiency, reducing money spent on energy, repair and
maintenance costs.
AMSOIL SE Series Synthetic Ester
Compressor Oils/Coolants maintain performance across a wide
operating temperature range. The low pour points, high viscosity
indices and lack of paraffins (wax) make these excellent all
season lubricants. At high temperatures, SE Series Synthetic
Ester Compressor Oils/Coolants form virtually no carbon,
allowing for clean operation. At cold temperatures, equipment
starts easier and the lubricant is quickly pumped to critical
components, preventing lubricant starvation and excessive wear.
SE Series Synthetic Ester Compressor Oils/Coolants also resist
water to prevent damaging oil/water emulsions, allowing for
longer lubricant life and ease of water removal from the sump.
|
AMSOIL "SIROCCO"™ Synthetic
Compressor Oil has won a Bronze Award in the "Plant Services MRO Product of the
Year" competition. In fact, "SIROCCO"™ was the only lubricant product named
this year.
"SIROCCO"™ has already had a profound impact on the rotary screw compressor
oil market by offering users tremendous performance and cost savings over competitive
products. These qualities make "SIROCCO"™ Compressor Oil exactly the type of
high-performance, high-value product that customers have come to expect from AMSOIL.
|
PERFORMANCE
FEATURES
-
Resists
foaming
-
Rust
and oxidation inhibited
-
Readily
separates from water
-
Recommended
for use in rotary screw and reciprocating compressors
-
Long-life/extended
drain performance
-
Compatible
with polyglycol fluids such as Sullube 32® and
Ingersoll-Rand SSR Ultra-coolant®
-
SEI
is biodegradable under the CEC-L33-A94 standard
SAFETY
ADVANTAGE
AMSOIL SE Series Synthetic Ester
Compressor Oils/Coolants have higher flash, fire and auto
ignition points than competitive petroleum oils. Their
resistance to carbon formation and the ashless additive system
minimize the incidence of deposits acting as ignition-promoting
hot spots. Although AMSOIL SE Series increase fire safety, they
cannot be considered non-flammable.
APPLICATION
RECOMMENDATION
AMSOIL
SEI is a multi-viscosity oil meeting the requirements of 5w-20.
It may be used in applications calling for either an ISO-32 or
ISO-46 compressor oil or coolant. It is recommended for use in
single and multi-stage rotary screw compressors and vacuum pumps
that call for this viscosity.
When
installing AMSOIL SEI, it is recommended that the old oil be
thoroughly drained and if warranted, the system cleaned. If a
lot of carbon or residue is found on the internal compressor
parts, follow the manufacturer's recommendations for removal
prior to installing the new oil. AMSOIL SE
Series Synthetic Ester Compressor Oils/Coolants have a high
level of solvency and may remove deposits left in the system.
Check the filters and oil/air separators regularly for the first
500 hours of operation and replace as necessary.
AMSOIL SEI is
compatible with and recommended as a replacement for much higher
priced polyalkylene glycol (PAG) compressor oils or coolants
such as Sullube 32® and Ingersoll Rand SSR Ultra Coolant®. No
flushing is necessary when changing over from Glycol Coolants to
AMSOIL SEI. However, draining the system and changing the
filters is recommended.
AMSOIL SEI is
recommended for use up to 8,000+ hours for most compressor
applications. However, this is subject to operating conditions
and maintenance practices.* Monitoring by oil analysis every
1,000 hours is recommended.
* Where discharge
temperature exceeds 205°F, lubricant life expectancy is
reduced.
COMPATIBILITY
AMSOIL SEI is compatible with petroleum oils, most synthetic oils*,
and many seals, paints and materials commonly used in
compressors. Materials recommended and not recommended for use
with SEI oils/coolants are listed below. For additional
information, see the AMSOIL Compatibility Guide (G-1274) or
consult your AMSOIL Dealer or AMSOIL INC.
*AMSOIL SE
Series is NOT RECOMMENDED as a replacement or for use with the
silicone based compressor oil Sullube 24KT®. AMSOIL SE Series
is NOT RECOMMENDED for use in "Breathing Air or
Refrigeration" compressors.
RECOMMENDED
Seals - Viton®,
High Nitrile Buna N (>36%), Teflon®
Paints - Epoxy,
Oil-Resistant Alkyd, Two-Part Urethane
Plastics - Nylon,
Delrin®, Celcon®, PBT
NOT
RECOMMENDED
Seals - Neoprene,
SBR Rubber, Low Nitrile Buna N
Paints - Acrylic
Paint, Lacquer
Plastics -
Polystyrene, Polycarbonate Plastic, PVC, ABS
NOTE: Process
gasses suitable for use with the SE Series:
Nitrogen,
hydrogen, helium, carbon monixide, carbon dioxide (dry),
ethylene, methane, propane, butane, propylene, butylene, natural
gas, benzene, butadiene, furnace (crack gas), hydrogen sulfide
(dry), sulfur hexafluoride, synthetic gas, sulfur dioxide.
AMSOIL PRODUCT
AVAILABILITY
AMSOIL SE Series
is available in 5-gallon pails, 55-gallon drums, 275-gallon
totes, and bulk quantities. For 275-gallon totes, please allow
two to four weeks for delivery.
Sullube 32®
and Sullube
24KT® are
trademarks of the Sullair Corporation. Ingersoll-Rand SSR
Ultra-Coolant®
is a
trademark of Ingersoll-Rand, Inc.
Technical Properties Chart
"SIROCCO"™ SE Series Synthetic Ester Compressor Oil
- SEI-05 (ISO 32/46), 5-gal pail
- SEI-55 (ISO 32/46), 55-gal drum
|
