| Family | Truck/Fleet | Motorcycle/ATV | 4-Wheel | Farm | RV | Boat/Marine | Snowmobile | Lawn/Garden | Industrial | Performance |
 
AMSOIL Synthetic Gear Lubes

AMSOIL Meets the Demand for Heavy Duty Gear Lubes

A MSOIL SYNTHETIC GEAR LUBES save money by making drive trains operate as efficiently as possible for as long as possible. The superior "slipperiness" of AMSOIL Synthetic Gear Lubes makes gear boxes run cooler and easier. Components move with less resistance, even under heavy loads, allowing the maximum use of every gallon of fuel.

The outstanding extreme pressure and anti-wear properties of AMSOIL Synthetic Gear Lubes keep wear at an absolute minimum. The results: greater equipment reliability and less money spent on repairs, replacement parts, and costly down-time.


Helpful Recommendations for Differential Refilling:

  • Flush (drain) as much of the old fluid out as possible.

  • Differential fluid capacity depends on ring gear and axle housing size.

  • Do not over/under fill differential. This could mean a capacity difference of a quart or more and may cause over heating problems. (See the owner’s manual for proper fill level)

  • AMSOIL gear oils are formulated with friction modifiers for limited slip differential applications. There is no need to add limited slip or additional additives.

  • After changing the differential fluid, drive the vehicle in 7 or 8 figure eight turns, so new lubricant can work its way into the axle assembly.

 
 
Copyright © 2000 - 2016 All Synthetics Group. All Rights Reserved.

Home | Top