| Family | Truck/Fleet | Motorcycle/ATV | 4-Wheel | Farm | RV | Boat/Marine | Snowmobile | Lawn/Garden | Industrial | Performance |
 
AMSOIL Dual Remote By-Pass Oil Filter System

For Optimum Oll Filtration and Maximum Service Accessibility

Typical Dual Remote System Installation

The AMSOIL Dual Remote Oil Filtration System replaces the standard full-flow oil filter with a combination full-flow / by-pass system, using a remote mounting assembly.

The mount couples an AMSOIL Full-Flow Oil Filter with an AMSOIL Spin-On By-Pass Filter; it takes oil from the engine and returns it without the use of multiple fittings or extra return holes in the oil pan or valve cover. The mount and filters are installed in an accessible area of the engine compartment.

A specially-manufactured, spin-on steel casting with threading adapters is simply screwed onto the engine block's filter nipple, replacing the old full-flow filter. In-and-out ports in the casting and two flexible oil lines connect this adapter to the remote mount.

Used as part of the AMSOIL Dual Remote Oil Filtration System, the Spin-on By-Pass Filter and the SDF Full Flow Oil Filter provide the ultimate in filtration for your engine's life blood, and can add years to your engine's service life.

Dual Remote Filter System Kit

Remote placement of the filtration units allows larger oil filters to be used, and increases oil sump capacity - dramatically extending the oil's useful service life and protecting your wise investment in AMSOIL Synthetic Motor Oil. The recommended replacement interval for both the AMSOIL Full-Flow Oil Filter and the AMSOIL By-Pass Oil Filter is six months or 12,500 miles.

USER FRIENDLY!
The Dual Remote's above-crankcase spin-on filter units minimize oily mess. You locate the mounting bracket in any convenient accessible area under the hood in your engine compartment.

BMK-23 Installation and Servicing Instructions

BMK-25,-26,-27 Installation and Servicing Instructions

Filter Change Interval Recommendations

Complete Parts List for All By-Pass Filter Models


AMSOIL Dual Remote Oil Filtration Kits
(Includes all installation parts and adapters)
  • BMK-23 Kit (gasoline engines, filter elements not included)
  • BMK-25 Kit (Dodge, Cummins Diesels, elements included)
  • BMK-26 Kit (Ford, International Diesels, elements included)
  • BMK-27 Kit (2001-02 Chevrolet, GMC w/Duramax 6.6L V-8 Diesel, elements included) NEW
Dual Remote Filter Elements
(For BMK-23 Kits, and replacement elements for BMK-25, BMK-26 and BMK-27 Kits; one by-pass and one full-flow required)
  • EaBP90 By-Pass Element (for sumps up to 9 qts, requires 1 additional qt of oil)
  • EaBP100 By-pass Element (for sumps up to 15 qts, requires 1.5 additional qts of oil)
  • EaBP110 By-Pass Element (for sumps up to 21 qts requires 2 additional qts of oil)
  • EA026 Full-Flow Element (fits all three kits)
Dual Remote Filter Elements (Initial order for BMK-25, BMK-26 and BMK-27 Kits; one by-pass and one full-flow required)
  • EaBP90 By-Pass Element (for sumps up to 9 qts, requires 1 additional qt of oil), N/C
  • EaBP100 By-pass Element (for sumps up to 15 qts, requires 1.5 additional qts of oil), N/C
  • EaBP110 By-Pass Element (for sumps up to 21 qts requires 2 additional qts of oil), N/C
  • EA026 Full-Flow Element (fits all four kits), N/C

NOTE: Contact your AMSOIL Dealer or call the AMSOIL Technical Services Dept at 715-392-7101 if you have any questions about the systems above.

Secure Order Link

For industrial pricing email me at .

For retail pricing information:

  • Go to the ASMOIL On-Line Store through the link above
  • Email me at .
  • Fax me at: 270-522-0512

If You Prefer To Order by Phone: TOLL FREE: 1-800-956-5695 (See Telephone Order Page).
Customer Ordering Number: 522955

Check here for discount pricing plan.

Figure amount in Canadian Dollars.
 
 
Copyright © 2000 - 2016 All Synthetics Group. All Rights Reserved.

Home | Top