| Family | Truck/Fleet | Motorcycle/ATV | 4-Wheel | Farm | RV | Boat/Marine | Snowmobile | Lawn/Garden | Industrial | Performance |
 
AMSOIL SAE 10W (CTG) Synthetic Powershift Transmission Fluid

Performance Data
AMSOIL SAE 10W (CTG) Synthetic Powershift Transmission Fluid is Recommended for Applications Requiring the Following Specifications:

  • Caterpillar TO-4
  • Twin Disc
  • Komatsu T-10
  • Allison C-4
  • Rockwell/Eaton/Fuller CD-50 (PS-081)
  • ZF TE-ML 03C
  • API GL-1

Applications

  • Dozers
  • Semi-trucks manual transmissions
  • Wheel loaders and crawlers
  • Backhoe loaders
  • Cranes
  • Off-road fork trucks
  • Harbor handling equipment
  • Railway equipment
  • Mining equipment
  • Road graders
  • Commercial boats

AMSOIL Synthetic 10W Powershift Transmission Fluid can be used in Caterpillar, Allison, Komatsu, Clark, Hurth, Borg-Warner, Twin Disc, Voith, ZF, Funk and Brockhouse powershift-type transmissions and Eaton/Rockwell/Fuller transmissions.

Installation
AMSOIL Synthetic Powershift Transmission Fluids are fully compatible with other TO-4 fluids used in powershift applications. To install AMSOIL Synthetic Powershift Transmission Fluids, drain the fluid in the system, replace the filter (if so equipped) and install the appropriate Powershift Transmission Fluid.

Service Life
AMSOIL Synthetic Powershift Transmission Fluids provide extended service life beyond conventional petroleum fluids if Synthetic Powershift Transmission Fluids are kept free of dirt and moisture. Oil analysis is recommended if extending service intervals beyond equipment manufacturer recommendations.

AMSOIL Synthetic Powershift Transmission Fluids may be used for 250,000 miles or two years (whichever comes first) in CD-50 manual transmission applications.

AMSOIL Limited Warranty

Typical Technical Properties
AMSOIL SAE 10W Synthetic Powershift Transmission Fluid (CTG)
SAE Viscosity Grade 10W
ISO Viscosity Grade 32
Kinematic Viscosity @ 100° C, cSt (ASTM D-445) 7.1
Kinematic Viscosity @ 40° C, cSt (ASTM D-445) 41.3
Viscosity Index (ASTM D-2270) 133
Flash Point °C (°F) (ASTM D-92) 248 (478)
Fire Point °C (°F) (ASTM D-92) 266 (511)
Pour Point °C (°F) (ASTM D-97) -49 (-56)
Four Ball Wear Test 40 kg. 75°C, 1200 rpm, 1 hour (ASTM D-4172 B) 0.35
Noack 250°C, 1 hour, percent weight loss (DIN 51581) 5.3
(Also see SAE 30 and SAE 50 Powershift Transmission Fluid)

 
 
Copyright © 2000 - 2016 All Synthetics Group. All Rights Reserved.

Home | Top