Product Code: AMO
Offering excellent wear protection where the extra protection of a high zinc formaula is desired.
Excellent for flat tappets, high performance, heavy duty and high mileage applications.
MSOIL SAE 10W-40 Synthetic Premium Protection Motor Oil (AMO) is designed to provide maximum benefits in gasoline and diesel engines.
AMSOIL 10W-40 Synthetic Premium Protection Motor Oil
may be used in engines requiring oils meeting the following
specifications:
- API SL/CF, CI-4 Plus
- ISO-L-EMA
- API SJ, SH, SG...
- Cummins 20071, 20072, 20076, 20077
- ISO-L-EMA
- JASO-MA (Motorcycle)
Product Description
AMSOIL 10W-40 Synthetic Premium Protection Motor Oil provides
superior protection and performance in the most severe automotive
driving conditions. AMSOIL 10W-40 Synthetic Premium Protection Motor Oil
provides a wide range of protection in all four-cycle
gasoline and diesel engines, including pickups, RVs, cars and
off-highway vehicles. It is recommended for use in vehicles
subject to stop-and-go driving, short trips, high temperatures,
frequent trailer pulling and off-road use.
Mixing AMSOIL
AMSOIL 10W-40 Synthetic Premium Protection Motor Oil is compatible with
conventional petroleum oils; however, mixing AMSOIL 10W-40 with a conventional
oil will shorten the drain period of AMSOIL 10W-40. Engine oil additives or
after-market products are not recommended for use with AMSOIL 10W-40.
New Vehicle Under Warranty
AMSOIL 10W-40 Synthetic Premium Protection Motor Oil will not
void new vehicle warranties. New vehicle warranties are based on
the use of oils meeting specific API service classifications and
SAE viscosity grades. AMSOIL 10W-40 Synthetic Premium Protection Motor Oil
meets the current API and SAE requirements (as labeled) and is
perfectly situated for use in any new vehicle stipulating those
requirements in its owner's manual.
Service Life
AMSOIL Synthetic 10W-40 Premium Protection Motor Oil is recommended for extended intervals in unmodified, mechanically-sound vehicles or equipment as follows:
Diesel Engine Service
•Normal Service - Up to 25,000 miles or one year, whichever comes first, or longer based on oil analysis.
•Severe Service - Up to 15,000 miles or one year, whichever comes first, or longer based on oil analysis.
Gasoline Engine Service
•Normal Service - Up to 15,000 miles or one year, whichever comes first, or longer based on oil analysis.
•Severe Service - Up to 15,000 miles or one year, whichever comes first, or longer based on oil analysis.
Motorcycles, Small Engines, Stationary Engines, Heavy Equipment and Other Applications
•Extend drain intervals based on oil analysis or follow the manufacturer-recommended drain interval.
AMSOIL Ea™ Full-Flow Oil Filters are designed for extended drain intervals. They stop smaller particles, flow more oil and last longer than regular filters. For best performance, use AMSOIL Ea™ Full-Flow Oil Filters and replace at the time of oil change. Other oil filters should be changed at standard OEM* intervals.
*OEM - Original Equipment Manufacturer
If the vehicle is equipped with an AMSOIL Oil Filter, the
filter should be changed at 12,500-mile or six-month intervals
(whichever comes first) in gasoline engines. Non-AMSOIL oil
filters should be changed at the engine manufacturer's
recommended filter change interval.
Technical Specifications
Table of Oil Drain Interval Recommendations
10W-40 SYNTHETIC PREMIUM PROTECTION MOTOR OIL
- AMOQT-EA, quart
- AMOQT-CA, Case of 12 quart
- AMO1G-EA, gallon
- AMO1G-CA, case of 4 gallons
- AMOTP-EA, 2.5-Gallon Bottle
- AMOTP-CA, 2.5-Gallon Bottles (case of 2)
- AMO30-EA, 30-Gallon Drum
- AMO55-EA, 55-Gallon Drum
For retail pricing information:
- Go to the ASMOIL On-Line Store through the link above
- Email me at .
- Fax me at: 270-522-0512
If You Prefer To Order by Phone: TOLL FREE: 1-800-956-5695
(See Telephone Order Page).
Customer Ordering Number: 522955
|
Check here for discount pricing plan.
Figure amount in Canadian Dollars.
|